125 LIGHT DUSTY GREY- Semilac STEP ONE Hybrid / Gel Polish 5 ml Bottle
125 LIGHT DUSTY GREY Semilac STEP ONE Hybrid / Gel Polish 5 ml Bottle
DISCOVER THE INNOVATIVE SEMILAC STEP ONE HYBRID GEL POLISH IN A BOTTLE
Semilac 3in1 Gel Polish - LIGHT DUSTY GREY is a UV gel polish in a subtle whitened gray color.
Why you will love our Semilac 3-in-1 'Skin Tone' collection ?*:
- UV gel nail polish to enhance the beauty of your natural complexion,
- Fashionable, natural colors – follow the trends,
- Colors inspired by sauteing manicures straight from the catwalk,
- its 3-in-1 formula: combining a base coat, a color, and a top coat all in one product!
- you can apply a manicure in 20 minutes, so it doesn’t take longer than a cup of coffee,
- the colors of One Step Hybrid UV gel polishes from the Skin Tone collection perfectly match your skin tone,
- easier application compared to the standard formula,
- 2 layers of the UV gel polish to achieve the perfect color on your nails,
- shiny finish,
- nails are harder and visibly stronger,
- the long-lasting effect of up to 21 days,
- VEGAN formula,
- dermatologically tested UV gel nail polishes.
SEMILAC ONE-STEP HYBRID - INSTRUCTIONS FOR USE:
STEP 1 - Shape the nail plate and polish the nail plate, degrease the nails with Semilac Nail Cleaner.
STEP 2 - Paint the nails with a thin layer of varnish, and also paint the edge of the nail.
STEP 3 - Cure in the lamp. Repeat steps 2 and 3 until the color coverage is satisfactory.
STEP 4 - Wipe the nails with a cotton pad soaked in Semilac Nail Cleaner.
STEP 5 - Polish the nails with an olive or a polisher with a grade of 4000.
STEP 1 - Soak Semilac Remover Wraps pads with acetone or Semilac Remover liquid.
STEP 2 - Apply cotton pads to the nail plate and wrap each finger carefully with foil for 10-15 minutes.
STEP 3 - Remove the foils and remove the varnish with a wooden stick or pusher. If the varnish does not come off, repeat steps 1&2
STEP 4 - Even out the surface of the nail plate with a Semilac polishing block.
STEP 5 - Apply manicure oil
We recommend applying 3 layers of the product
UV LED 12 W lamp – 60 sec
UV LED 24W/36 lamp – 30 sec
UV LED 24W/48 W lamp – 30 sec
Diamond UV LED 24W/48 lamp – 30 sec
Diamond UV LED 36W/54 lamp – 30 sec
Ingredients: Di-HEMA Trimethylhexyl Dicarbamate, HEMA, Isobornyl Methacrylate, Cellulose Acetate Butyrate, Glycol Dimethacrylate, PEG-9 Dimethacrylate, Hydroxycyclohexyl Phenyl Ketone, Trimethylbenzoyl Diphenylphosphine Oxide, Silica, Bis(Methacryloyloxyethyl) phosphate, BHT, p-Hydroxyanisole, Hydroquinone, CI 77891, CI 77499, CI 77492.
Hybrid varnishes should be applied to the nail plate in the form of thin layers (too thick layers, in particular of highly pigmented varnishes, may prevent the product from hardening properly).
The recommended hardening times of the products should be adhered to. When placing your hands under the lamp, make sure that the manicure is evenly lit - the thumbs may be a vulnerable place.
Take care of the maintenance of your lamp - keep it clean so that its light is not limited by dirty diodes/bulbs/base. In the case of a traditional UV lamp, remember to regularly replace the fluorescent lamps (every 3-6 months, depending on the intensity of use).
During application, avoid direct contact of hybrid varnishes with the skin - any dirt should be immediately cleaned with a cotton swab soaked in Nail Cleaner or removed with a stick. Spilling hybrid varnish on the skin may cause an allergic reaction. In case of irritation or hypersensitivity, discontinue use. Products should be used in well-ventilated rooms. Avoid contact with the product with the eyes. If the product comes into contact with the eyes: rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists, seek medical attention. If in doubt about the safe use of the product, please contact the manufacturer/seller.